EMF Measurement Equipment & Shielding Materials
Cart 0

HOW TO SHIELD YOUR HOME FROM CELL TOWER RADIATION

Here are some useful tips to prevent from Cell Tower RF radiation:

Shielding a home from cell tower radiation is reasonably straightforward compared to magnetic field shielding.Ideally, you want to create a continuous, highly conductive enclosure around the home. Any areas that are not conductive, even cracks under a door will most definitely allow harmful radiation to leak in. However, in a home environment, total radiation elimination may not be required. About a 90% reduction is required to reduce harmful health effects.

Depending on your needs after you have measured with an HF35C or HF32D meter, there are several suitable materials to use. Some materials are more appropriate for walls and ceilings, while other are better for windows. The higher the conductivity of the material, the better the shielding it will provide. Keep in mind such additional factors such as: durability, corrosion resistance, toxicity, ease of installation, appearance, and size.

For doors, walls, floors and ceilings, our conductive paints offer very good shielding and are very easy to apply.  You can paint over the conductive paint with a standard latex paint to achieve the desired color and to protect the conductive surface, as our paints come in a dark color.

You can also cover the walls with a conductive fabrics that we offer or if you are building a new home the fabric can be inserted between the drywall construction. Apply the fabric as you would a wallpaper, remembering to overlap slightly at the seams to avoid leakage. You can cover over the fabric with a standard wallpaper, paneling or drywall. You can use our fabrics to make curtains to shield the RF/HF radiation as well!

Also remember to provide proper grounding to each component which is not in contact with the others!


Older Post


  • Sivakumar on

    I am planning to buy an apartment which has cell phone tower. I have two small kids, how can i protect them from the radiation. What are the solutions/alternatives? How much it will cost me. Let me know.

    Thanks

  • John Signorino on

    We know where the cell tower is. The windows and doors facing the cell towers have “low e” glass so:

    1. If we paint the walls facing the tower will this work – reduce RF significantly 80 to 90%
    2. Is painting the wall facing the tower is this adequate – what reduction % can we expect
    3. Do we also need to paint the ceiling?
    4. What exactly does the grounding do?
    5. Do you have a recommendation for a contractor in San Diego to do this work?
    6. We are looking at a few gallons, any quantity discount?

  • Ela on
    we need to install the device for a building Protection from Cellphone tower can you please send me the quotation
  • PRAKASH CHANDRA on

    Sir, Our office is on 2nd floor and on the roof top BSNL mobile tower is there, we are facing the radiation effect what are the solution

  • M S SUBBA RAO on

    i would like to reduce minimise radiations because so many mobile towers are very near to my home.how to check radiation levels and what are the norms



Leave a comment

Please note, comments must be approved before they are published