Skip to content
Free Standard Shipping for orders over $30 USD (USA and Canada only) - Size and weight limits may apply.
Free Standard Shipping for orders over $30 USD (USA and Canada only). Size and weight limits may apply.


Here are a few strategies for Shielding various parts of your home from EMFs whether you are shielding a home in the process of being built or an already existing one.

Breaker box:
Your breaker box is a source of Low-Frequency (LF) magnetic AND electrical fields. You need to shield from BOTH types of radiation. If you are in the process of building a home, you can begin shielding from within the walls. Our Shielding Fleece, HNV80, shields from LF and HF electrical fields. To complement this, you should also use MCL61 Shielding Film to block the magnetic fields; this way both electrical and magnetic fields are taken care of. These solutions also need to be grounded as well, which can easily be done with a grounding plate or one of our grounding sets.  To ground the MCL61, the grounding set MCL consists of 10 screws that hammer into each strip and are connected by a wire connector that ushers the harmful radiation our into a grounding plate that is connected to the wall nearby. Effective and simple.
If your home is already constructed, you can block the LF electrical fields by painting a one meter radius around the box with our NSF34 paint. The paint must also be grounded to conduct the electricity out. The Grounding Set ESW and Grounding Strap EB2 are designed specifically with this purpose in mind as they are effective and discreet looking.

The Fridge is a source of LF Magnetic Fields and LF Electrical Fields. You need to shield the areas surrounding the fridge. We suggest using the HNV80 and MCL61 if you are internally shielding in the walls and using the paint if you are externally shielding. With LF radiation, it is not enough to simply shield the source; you must shield around the entire source as LF radiation patterns emit differently than HF radiation that can be concealed if only shielded at the source.

Smart Meters:
The Smart Meter is a notorious emitter of High Frequency (HF) radiation. It is necessary to paint around it in a 1m radius with a paint like HSF55 or HSF74 that offers a high attenuation. It is necessary for the paint to be grounded as it is electrically conducted and requires a grounding kit to siphon out the electricity safely.

Cell Towers/Wi-Fi:
The rule is that if you can see Cell Towers from your home, they are having an effect on your living space and you! They are a potent source of HF radiation and your home should be at the very least, shielded with HF paint on your interior walls. HF radiation is far reaching and if your home is undergoing drywall construction, it is beneficial to install MCL61 and HNV80 to prevent against HF magnetic and electrical fields which wall also block from Wi-Fi networks. You can avoid using a Wi-Fi network by hardwiring your electronics or using a magic jack.


Ariel - May 6, 2021

We just rented a townhouse and discovered the electric box is next to our dining area AND there are sounds of electrical movement in daughter’s bedroom close by. We can’t move for a while and I’m devastated we missed this. Worried for health. I’m unable to make many changes to our home. What do you recommend? Is the film ugly? Easily removable? Affordable? I haven’t checked actual numbers, yet feel I can’t let family be in those areas to long.


Hello Tammy, Thank you for reaching out to us. We hope you found the blog very useful. We would recommend using the Woremor WMF-300 Shielding Film. This film is excellent for shielding against the harmful LF magnetic radiation that comes from the breaker panel box as well as LF electric fields once grounded. Please give us a call at 310-746-3686 to discuss installation instructions, and we can also address any product specifications questions that you may have. We look forward to hearing from you.

Tammy - January 14, 2021

I have a huge two breaker box behind my dining room wall
I live in a condo that is the electrical panel for two floors .
I have done a EMF reading that is very high.
Iam very concerned is copper the best? What material is the best protection? Where should the sheild be placed? Thanks!!


Hello Jackie, thank you for reaching out to us. The major concern for health when it comes to panel boxes is magnetic radiation. You can protect yourself from LF magnetic fields with Woremor WMF-300 shielding film. It is a really fantastic film that will definitely help to protect your family. It comes in a two foot fixed width and then you can select how many feet you want to purchase after that. I hope this helps. If you would like more information on the film you can also search WMF-300 in our search bar at the top of the page.

Jackie - May 26, 2020

Hi, I live in an apartment and there is a little electric Panel in the hallway between the bedroom, is there anything I can cover it with to block EMF?? Thanks

Mike - January 1, 2020

Carolyn because you just started building you have more options available to shield your home. You can use materials such as, Woremor paint and FL100 shielding fabric for the walls, ceilings and floors and a variety of fabric to use as a curtain for your windows. Please call us and we will be happy to assist you and give you advice.

Carolyn - December 30, 2019

Where do I start and what is most effective for protection from EMF’s when building at new home?

Erik - September 5, 2019

researching the EMF paint… I have read that it will block cell towers including 5g… HOWEVER I also read that it will NOT block cell phone signals. Is this true? and if so how is it possible? Explanation?

Leave a comment

Comments must be approved before appearing

* Required fields