Skip to content
Free Standard Shipping for orders over $30 USD (USA and Canada only) - Size and weight limits may apply.
Free Standard Shipping for orders over $30 USD (USA and Canada only). Size and weight limits may apply.
RF Explorer Signal Generator COMBO

RF Explorer Signal Generator COMBO

by EMR Shielding Solutions
$ 399.00 - $ 399.00
$ 399.00
$ 399.00
$ 399.00 - $ 399.00
$ 399.00

RF Explorer Signal Generator Combo is a major improvement over the standard RF Explorer RFE6GEN Generator. The new generator includes important functions requested by our most demanding customers.
The new COMBO product includes harmonic filtering, high-performance amplifiers for higher output power, fine amplitude adjustment and support for frequencies as low as 100KHz covering up to 6GHz with no gaps.

See below comparison of a 25MHz signal generated with new improved RF Explorer Signal Generator Combo (in red) and a signal generated with standard unfiltered RF Explorer RFE6GEN (blue). The new Generator Combo offers a perfect sinusoid filtered signal as opposed to the squarish unfiltered signal from RFE6GEN.

RF Explorer Signal Generator COMBO

 Features 

  • Pocket size and lightweight
  • Solid aluminum metal case
  • Lifetime free firmware upgrades available, open to community requested features
  • High capacity Lipo for 10hs+ of continuous run, rechargeable by USB
  • RF Explorer for Windows free software for CW, Sweep and Tracking SNA control
  • Automation libraries available in Python and .NET, free USB API for any programming language
  • Wideband support, very stable CW signal output
  • Fine amplitude adjustment 0.25dB
  • High output power up to +18dBm
  • Optional recalibration procedure available upon request

Specification

  • Frequency range supported: 100KHz to 6000 MHz
  • Calibrated Amplitude range: -40 to +10dBm
  • Uncalibrated extended Amplitude range: -60 to +18dBm
  • Amplitude step/resolution: 0.25dB over calibrated range
  • Amplitude accuracy (typical): +/-2dB in most frequency and power ranges
  • Frequency step/resolution: 1KHz
  • Frequency stability: 0.5ppm
  • Temperature compensated (0-45C)
  • Backlight for great indoor visibility and high contrast LCD for outdoor visibility
  • Standard SMA 50 ohms connector
  • Spurs: Internal fractional PLL configuration in some cases create spurs typically -50dBc or less.
  • Harmonics: typical values range about -40dBc for 2nd harmonic, -50dBc for third and higher harmonics.
  • Switch measurement point speed < 10ms
  • Graphics LCD 128x64 pixels, great visibility outdoors
  • PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits
  • Functional modes:
    • CW signal generator at any frequency in the range
    • Tracking generator functionality working together with RF Explorer Spectrum Analyzer when connected to the same PC
    • Sweep generator between any to frequencies in the range, with selectable step size and speed
  • CE / FCC / RoHS compliant
  • Additional details and datasheet at www.rf-explorer.com/RFEGENCOMBO

User manual