STEP 1
Visit the link provided to your email:
Enter the required information below and press SUBMIT.
1. Device Serial Number
2. Your email
(PLEASE NOTE THE SERIAL NUMBER CAN BE FOUND BY FIRST PRESSING THE CONFIG TAB AND THEN THE ABOUT TAB ON THE DEVICE)
STEP 2
Check for an email received from RF Explorer and copy the attached .DAT file(s) to the root directory of a FAT32 USB drive (a regular USB key should be fine).
STEP 3
Copy the following link for the updated firmware onto the same USB drive.
STEP 4
Ensure your Pro device is turned off then plug in the USB key and connect the charger to the device and your PC.
STEP 5
Turn on your device and navigate to the USB key directory. Run the firmware file from Step 3 and follow the installation instructions.
STEP 6
Upon completion of the firmware upgrade, the frequency range will now be expanded to 7.5GHz.